|
Section 1 | Identification Information - - - - - - top |
Originator | Minnesota DNR Waters - County Geologic Atlas and Regional Hydrogeologic Assessment Program |
Title | S3SDGLPY |
System Name | |
Abstract | The purpose of this file is to show the distribution of thick (>20 feet) sand and gravel in the buried S3 Unit in southern Pine County, Minnesota (characteristic elevation between 900-860 feet MSL). |
Purpose | County Geologic Atlas and Regional Hydrogeologic Assessment Program, Pine County Atlas, Part B, CGA-13 |
Time Period of Content Date | Publication date |
Currentness Reference | The interpretations used the best information and critiques available up to the time of publication. |
Progress | Complete |
Maintenance and Update Frequency | None Planned |
Spatial Extent of Data | Pine county. |
Bounding Coordinates | East | -92.2 | West | -93.2 | North | 46.5 | South | 45.7 |
|
Place Keywords | Minnesota, Pine County |
Theme Keywords | Quaternary aquifer, buried sand and gravel |
Theme Keyword Thesaurus | None |
Access Constraints | None |
Use Constraints | Users may wish to verify critical information; sources include both the references here and information on file in the offices of the Minnesota Geological Survey and the Department of Natural Resources. Every effort has been made to ensure the interpretation shown conforms to sound geologic and cartographic principles. This map should not be used to establish legal title, boundaries, or locations of improvements. |
Contact Person Information | See Metadata Reference Information section, below |
Browse Graphic File Name | |
Browse Graphic File Description | |
Associated Data Sets | MGS ftp site. , S2 aquifer potentiometric contour elevations. |
|
Section 2 | Data Quality Information - - - - - - top |
Attribute Accuracy | |
Logical Consistency | Data are topologically correct using ArcView 3.3 |
Completeness | Complete |
Horizontal Positional Accuracy | unknown |
Vertical Positional Accuracy | not applicable |
Lineage | The polygon file was created around a point file containing sand and gravel thickness, elevation and unit classification created by Jim Berg. The polygon file was created on-screen by Jim Berg using ArcView 3.3. |
Source Scale Denominator | 100,000 |
|
Section 3 | Spatial Data Organization Information - - - - - - top |
Native Data Set Environment | ArcView 3.3 |
Geographic Reference for Tabular Data | Not Applicable |
Spatial Object Type | Vector |
Vendor Specific Object Types | polygon |
Tiling Scheme | state |
|
Section 4 | Spatial Reference Information - - - - - - top |
Horizontal Coordinate Scheme | UTM |
Ellipsoid | GRS1980 |
Horizontal Datum | NAD83 |
Horizontal Units | meters |
Distance Resolution | meters |
Altitude Datum | n/a |
Altitude Units | n/a |
Depth Datum | n/a |
Depth Units | n/a |
Cell Width | 0 |
Cell Height | 0 |
Latitude Resolution | 0 |
Longitude Resolution | 0 |
UTM Zone Number | 15 |
SPCS Zone Identifier | 0 |
County Coordinate Zone Identifier | 0 |
Coordinate Offsets or Adjustments | n/a |
Map Projection Name | n/a |
Map Projection Parameters | n/a |
Other Coordinate System's Definition | n/a |
|
Section 5 | Entity and Attribute Information - - - - - - top |
Entity and Attribute Overview | |
Entity and Attribute Detailed Citation HTML Table (Not Available) | s3sdglpy.dbf | | | | SG_THICK | Sand and gravel thickness for the S3 unit: "0-20" refers to less than 20 feet in thickness or absent; "20+" refers to greater than 20 feet. |
|
|
Section 6 | Distribution Information - - - - - - top |
Publisher | Minnesota DNR Waters |
Publication Date | 2004 |
Contact Person Information | See Metadata Reference Information section, below |
Distributor's Data Set Identifier | s3sdglpy |
Distribution Liability | This map was prepared from publicly available information only. Every reasonable effort has been made to ensure the accuracy of the factual data on which this map is based. However, the Department of Natural Resources does not warrant the accuracy, completeness, or any implied uses of these data. Users may wish to verify critical information; sources include both the references here and information on file in the offices of the Minnesota Geological Survey and the Department of Natural Resources. Every effort has been made to ensure the interpretation shown conforms to sound geologic and cartographic principles. This map should not be used to establish legal title, boundaries, or locations of improvements. |
Transfer Format Name | shapefile |
Transfer Format Version Number | |
Transfer Size | |
Ordering Instructions | Download ARCVIEW shapefiles from: Pine County Geologic Atlas, Part B: Metadata for GIS and Digital Data |
Online Linkage | Pine County Geologic Atlas, Part B: Metadata for GIS and Digital Data |
|
Section 7 | Metadata Reference Information - - - - - - top |
Metadata Date | 2004-06-28 |
Contact Person Information | GIS Specialist, Atlas/Assessment Program Minnesota DNR - Division of Waters 500 Lafayette Road Saint Paul, MN 55155 Phone: (651) 259-5693 FAX: (651) 296-0445 E-mail: |
Metadata Standard Name | Minnesota Geographic Metadata Guidelines |
Metadata Standard Version | 1.2 |
Metadata Standard Online Linkage | http://www.lmic.state.mn.us/gc/stds/metadata.htm |
| |
|